苏州斯文克精密测量设备有限公司代理CWT气体流量计，期待您的咨询。

CWT简介

   Computer Weld Technology (CWT) is located in the northwest part of Houston, Texas, founded in 1988, purchased the Industrial Welding Division of CRC-Evans Automatic Welding in January of 1994. On March 1, 2018, Computer Weld Technology was acquired by the Lincoln Electric Company.

Computer Weld Technology designs and manufactures automated welding equipment and quality control devices used in industrial welding applications, including automated welding fixtures and robotics. Several of the products can be used as peripheral or accessory items of larger systems manufactured by others.

Computer Weld Technology's primary function is providing complete solutions to industry for automating, controlling and monitoring the welding process. These solutions manifest themselves in the form of products designed and manufactured by CWT and technological assistance provided to our customers as a result of extensive research and development.

The over-riding strength of Computer Weld Technology is a personal desire and commitment on the part of every employee to see their efforts and hard work result in a profitable, on-going operation with a future for growth and a reputation for a company with high-technology products and a customer service ethic which is unsurpassed in the industry.

Among its existing customer base, CWT has a reputation for quality, being on the leading edge of technology and a very strong reputation for "after the sale " support of its products.

WDL III™ - Weld Data Logger **NEW** CWT数据记录仪   The Weld Data Logger represents leading edge technology in arc welding data collection and logging. The micro-controller based weld data acquisition system provides a means of measuring and documenting all basic welding parameters when used with external serial printer or PC. The WDL III can store uo to 4000 weld summeries in non-volatile memory. Additionally the WDL III has the unique ability to calculate heat input using the optional travel speed transducer, a user specified Travel Speed or the actual weld length and accumulated arc time. An Ethernet port is available for remote data collection and  stored weld summary data upload.

ADM IV™ - Arc Data Monitor 数据监视器   The ADM IV™ is a rugged, versatile and cost effective tool that can be arrayed in single and multiple arc configurations. It is a versatile quality control device that is capable of assuring that all of your arc welding parameters meet or exceed "ISO-9000", "QS-9000" standards and your Statistical Process Control (SPC) requirements. This user friendly, ADM IV™ Arc Data Monitor can be easily configured to fulfill the requirements of any end users needs. This device can be employed as a stand-alone unit using the "Remote Control Pendant" to configure the system and view the results or it can be linked to a PC to accomplish the same task.

GFM™ - Gas Flow Monitor **NEW**气体流量监视器   Computer Weld Technology's Gas Flow Monitor (GFM™) precisely measures flow rates of welding gasses. The GFM can be used for Argon, Helium, CO2 or any mixed inert welding gas. A flow rate (5 to 255 SCFH) is digitally displayed with a 1 SCFH resolution. The accuracy if the 3% of full scale reading in the GFM is considerably better than conventional ball type flow meters. The GFM can be install in-line down stream of the gas regulator for permanent installations. The unit is also available in a battery powered configuration with a rubber cone for testing gas flow at the welding torch nozzle.

SmartSensor™ **NEW**只能传感器   The SmartSensor™ is an Embedded Microcontroller device designed to collect and monitor welding parameters. In its basic form the SmartSensor is configured to monitor welding current and provides two user 24 VDC inputs and 24 VDC outputs. It also provides a RS-485 serial port with the Modbus™ protocol to allow the user to access the run time data and enable control functions. Additional sensors can be added to monitor other welding parameters. The SmartSensor can monitor Voltage, Wire Speed, Travel Speed, Gas Flow or Temperature.

WPM™ - Weld Process Monitor   The Weld Process Monitor (WPM™) is a Industrial Touch Screen Computer based system combined with the Micro ADM Weld Monitor to provide single point continuous data acquisition and weld monitoring for quality control of critical welding operations. It can be employed as a stand-alone unit or it can be connected via ethernet to a network for remote/ethernet access. The WPM™ can be configured with a 8.4”, 10.4” or 12.1” touch screen LCD that supports 800 x 600 SVGA resolution.

WireTrak™ - Wire Speed Sensor   The new product from Computer Weld Technology, Inc. for making your welding environment more efficient. By providing the necessary data acquisition; signal processing and communications firmware, the WireTrak™ allows remote logging of your wire utilization and actual productivity rates. The WireTrak™ is designed for monitoring and telemonitoring service purposes and is based on an embedded micro-controller.