TH-3001V 牙高规-Vermont螺纹规,PMC石油规,Mueller Gage直径量仪,Dorsey Metrology孔径规

栏目导航

Mitutoyo三坐标│投影仪│轮廓仪 Dorsey Metrology 缸径规│卡规瑞士TESA测高仪│昆山Sylvac量具美国Johnson Gage螺纹指示规美国GSG校正环规│进口对表环规美国PMC石油螺纹规│Van Keuren Barcor Inc.倒角规│小孔量仪德国IBR测量模块│C200电子柱美国WESTport螺纹规│硬度计德国JBO螺纹规│深度规、板牙 Vermont Gage螺纹规│VTG螺纹规 Rivelec印模泥│Plastiform复制胶 Lehrmess螺纹规│LMW莱尔麦斯德国STOTZ气动量仪│电感量仪 Rex Gauge橡胶硬度计│1600-A Marposs电子柱E4N│传感器F10 美国Bal-tec™精密测量球 Threadmaster│Tru-Thread螺纹规 Western Gage气动塞规│气动环规 Gagemaker单项仪│石油螺纹检测 Thread Check螺纹规│螺纹测针美国Dyer Gage卡规│缸径规 Sun-Tec便携式硬度计│硬度块 Cameron密封槽球规│喀麦隆球规苏州马尔量具│昆山Mahr粗糙度仪 Magnaflux美国磁通探伤设备耗材 Trulok 焊接量规│航空倒角规美国SPI 通用精密量具 Hemco Gage石油量规│涂层螺纹规测范社sokuhansha│JPG螺纹规美国G.A.L. Gage焊缝检验尺 Wrentham梅花通止规│WTG量规 GageAssembly螺纹规│G.A.CO 丹麦Leitech进口螺纹深度规 Mueller Gage/穆勒沟槽量仪美国环球Universal Punch量规苏州测量仪器│昆山进口螺纹规

您现在的位置：Vermont螺纹规,PMC石油规,Mueller Gage直径量仪,Dorsey Metrology孔径规 > 产品展示 > TH-3001V 牙高规

TH-3001V 牙高规

TH-3000系列量规是检查各种螺纹扣形螺纹高度变化的量规。在检查螺纹时所有型号量规要使用一个精密的触点放入部件螺纹，量规提供了不同结构的底座适合特殊螺纹的检查。
有些TH-3000量规在检查部件以前需用校准块进行调零，每次调零，需将砧骨放在螺纹牙顶上，当触点到达螺纹底部时，然后将测量仪左右摇摆，测得最短的深度读数，测量仪的指示器显示公称直径的实际偏差，这些量规配备了对称的指示器表盘，通常读数为0-25-0或0-50-0。
另外一些型号的量规不需要校准块，量规在任何一个平面上调整，然后使用它。这个螺纹的实际高度就显示在测量仪的指示器上，这些量规配备了连续的指示器表盘，通常读数为0-100。

特点：
- 检查多种螺纹扣形内/外螺纹高度。
- 使用对称型和连续型指示器。

TH-3000系列量规是检查各种螺纹扣形螺纹高度变化的量规。在检查螺纹时所有型号量规要使用一个精密的触点放入部件螺纹，量规提供了不同结构的底座适合特殊螺纹的检查。

有些TH-3000量规在检查部件以前需用校准块进行调零，每次调零，需将砧骨放在螺纹牙顶上，当触点到达螺纹底部时，然后将测量仪左右摇摆，测得最短的深度读数，测量仪的指示器显示公称直径的实际偏差，这些量规配备了对称的指示器表盘，通常读数为0-25-0或0-50-0。

另外一些型号的量规不需要校准块，量规在任何一个平面上调整，然后使用它。这个螺纹的实际高度就显示在测量仪的指示器上，这些量规配备了连续的指示器表盘，通常读数为0-100。

特点：

- 检查多种螺纹扣形内/外螺纹高度。

- 使用对称型和连续型指示器。

TH-3000-RSC-1	External Thread Height, 0-10-0, Tool Joint , .0001" Res. Indicator
TH-3000-USS	USS Improved Buttress External Thread Height Gage with balanced dial and T500C-USS
TH-3001R	External Thread Height, 0-100, 8-Round (T501)
TH-3001R-1	External Thread Height, 0-10-0, 8-Round (T501), .0001" Res. Indicator
TH-3001V	External Thread Depth/Height gage, 0-100, UN, ACME, Stub ACME, Line Pipe (.196 travel), (Same as TH-3001PD)
TH-3001V-1	External Thread Depth/Height gage, 0-10-0, UN, ACME, Stub ACME, Line Pipe (.196 travel), .0001" Res. Indicator
TH-3002B	External Thread Height Gage, 0-25-0, ¾” TPF Buttress (T072)
TH-3002B-1	External Thread Height Gage, 0-10-0, ¾” TPF Buttress (T072), .0001" Res. Indicator
TH-3002BB	External Thread Height Base Only, ¾” TPF Buttress
TH-3002R	External Thread Height Gage, 0-50-0, 8-Round (T501)
TH-3002R-1	External Thread Height Gage, 0-10-0, 8-Round (T501), .0001" Res. Indicator
TH-3002RB	External Thread Height Base Only, 8-Round (T501)
TH-3002S	External Thread Addendum (Shave) Gage, 0-50-0, 8 Round (T072), .196” Travel, 3.230” Min. Bore.
TH-3002S	External Thread Addendum (Shave) Gage, 0-25-0, 8-Round (T072), 1014S Standard required
TH-3002S-1	External Thread Addendum (Shave Gage), 0-10-0, 8-Round (T072), .0001" Res. Indicator, 1014S Standard required
TH-3002V	External Thread Height Gage, 0-50-0, Line Pipe/Tool Joint
TH-3002V-1	External Thread Height Gage, 0-10-0, Line Pipe/Tool Joint, .0001" Res. Indicator
TH-3002VB	External Thread Height Base Only, Line Pipe/Tool Joint
TH-3003B	External Thread Height Gage, 0-25-0, Step Base, 1” Buttress
TH-3003B-1	External Thread Height Gage, 0-10-0, Step Base, 1” Buttress, .0001" Res. Indicator
TH-3003BB	External Thread Height Base Only, 1” Buttress
TH-3004	Internal Thread Height Gage, 0-25-0, .0005, Line Pipe
TH-3004-1	Internal Thread Height Gage, 0-10-0, .0001, Line Pipe, .0001" Res. Indicator
TH-3004DD	Doug Dunford Special Clip Gage
TH-3004DD-1	Doug Dunford Special Clip Gage, .0001" Res. Indicator
TH-3006	Internal Thread Height Gage, 0-25-0, .0005, 8-Round
TH-3006-1	Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
TH-3008	Internal Thread Height Gage, 0-25-0, 8-Round
TH-3008-1	Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
TH-3009	Internal Thread Height/Depth Gage, 0-25-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), (Same as aTH-3009PD)
TH-3009-1	Internal Thread Height/Depth Gage, 0-10-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), .0001" Res. Indicator
TH-3009-RSC	Internal Thread Height/Depth Gage, 0-25-0, 1” Base Length, Rotary Shouldered Connections
TH-3009-RSC-1	Internal Thread Height/Depth Gage, 0-10-0, Rotary Shouldered Connections, .0001" Res. Indicator
TH-3010	Internal Thread Height Gage, 0-25-0, 1” Base Length
TH-3010-USS	USS Improved Buttress Internal Thread Height Gage with balanced dial and T500C-USS
TH-3012	Internal Thread Height Gage, 0-25-0 ¾” - 2” NPT
TH-3012-1	Internal Thread Height Gage, 0-10-0, ¾” - 2” NPT, .0001" Res. Indicator
Thread Data Chart	Thread Data Chart
Thread Height Standard	Calibration (except 1016 standard)
Thread Rolls	Calibration
TI-ACME-INT	Tapered Insert Identifier, Internal Acme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P, and 16P
TI-RSC-60	Tapered Insert Identifiers V032, V038R, V040, V050, V055, V066, V076
TI-RSC-90	Tapered Insert Identifiers A-0.094, 90-V-0.050, 90-V-0.050, 90-V-0.084
TI-SACME-INT	Tapered Insert Identifier, Internal StubAcme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P, and 16P
TI-T&C	Tapered Insert Identifier, 3/4" & 1" Tubing and Casing- 8 Round, 10 Round, Internal Buttress, and External Buttress
TM10-2-3	Special T-Micrometer - Base 10.00" wide - Range 2" - 3"
TM11-2-3	Special T-Micrometer - Base 11.00" wide - Range 2" - 3"
TM12-0-1	T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base
TM12-0-1-352	T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-0-25mm	T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble
TM12-0-25mm-352	T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-100-125mm	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble
TM12-100-125mm-352	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-1-2	T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base
TM12-1-2-352	T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-125-150mm	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble
TM12-125-150mm-352	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-150-175mm	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble
TM12-150-175mm-352	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-175-200mm	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble
TM12-175-200mm-352	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-200-225mm	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble
TM12-200-225mm-352	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-2-3	T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long base
TM12-2-3-352	T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long baseand the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-25-50mm	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble
TM12-25-50mm-352	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-3-4	T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base
TM12-3-4-352	T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-4-5	T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base
TM12-4-5-352	T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-50-75mm	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble
TM12-50-75mm-352	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-5-6	T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base
TM12-5-6-352	T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-6-7	T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base
TM12-6-7-352	T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-75-100mm	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble
TM12-75-100mm-352	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-7-8	T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base
TM12-7-8-352	T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-8-9	T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base
TM12-8-9-352	T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM16-2-3	Special T-Micrometer - Base 16.00" wide - Range 2" - 3"
TM18-0-1	T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base
TM18-0-1-352	T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-0-25mm	T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble
TM18-0-25mm-352	T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-100-125mm	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble
TM18-100-125mm-352	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-1-2	T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base
TM18-1-2-352	T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-125-150mm	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble
TM18-125-150mm-352	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-150-175mm	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble
TM18-150-175mm-352	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-175-200mm	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble
TM18-175-200mm-352	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-200-225mm	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble
TM18-200-225mm-352	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-2-3	T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base
TM18-2-3-352	T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-25-50mm	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble
TM18-25-50mm-352	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-3-4	T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base
TM18-3-4-352	T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-4-5	T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base
TM18-4-5-352	T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-50-75mm	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble
TM18-50-75mm-352	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-5-6	T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base
TM18-5-6-352	T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-6-7	T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base
TM18-6-7-352	T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-75-100mm	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble
TM18-75-100mm-352	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-7-8	T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base
TM18-7-8-352	T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-8-9	T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base
TM18-8-9-352	T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM20-2-3	Special T-Micrometer - Base 20.00" wide - Range 2" - 3"
TM20-2-3-352	T-MIC for Rotor major diameter 2-3" with ½" wide x 20" long base and Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-0-1	T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base
TM24-0-1-352	T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-0-25	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble
TM24-0-25mm-352	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-100-125	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble
TM24-100-125mm-352	T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-1-2	T-MIC for Rotor major diameter 1" - 2" with ½" wide x 24" long base
TM24-1-2-352	T-MIC for Rotor major diameter 1" - 2" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-125-150	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble
TM24-125-150mm-352	T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-150-175	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble
TM24-150-175mm-352	T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-175-200	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble
TM24-175-200mm-352	T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-200-225	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble
TM24-200-225mm-352	T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-2-3	T-MIC for Rotor major diameter 2" - 3" with ½" wide x 24" long base
TM24-2-3-352	T-MIC for Rotor major diameter 2" - 3" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-25-50mm	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble
TM24-25-50mm-352	T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-3-4	T-MIC for Rotor major diameter 3" - 4" with ½" wide x 24" long base
TM24-3-4-352	T-MIC for Rotor major diameter 3" - 4" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-4-5	T-MIC for Rotor major diameter 4" - 5" with ½" wide x 24" long base
TM24-4-5-352	T-MIC for Rotor major diameter 4" - 5" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-50-75	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble
TM24-50-75mm-352	T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-5-6	T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base
TM24-5-6-352	T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-6-7	T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base
TM24-6-7-352	T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-75-100	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble
TM24-75-100mm-352	T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-7-8	T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base
TM24-7-8-352	T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-8-9	T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base
TM24-8-9-352	T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM27-2-3	T-MIC for Rotor major diameter 2" - 3" with ½" wide x 28" long base
TM3.5-0-1	Special T-Micrometer - Base 3.50" wide - Range 0" - 1"

美国gagemaker进口价格，山东gagemaker量仪单价、上海gagemaker进口价格、美国进口量具价格与货期调研。