栏目导航
Mitutoyo三坐标│投影仪│轮廓仪
Dorsey Metrology 缸径规│卡规
瑞士TESA测高仪│昆山Sylvac量具
美国Johnson Gage螺纹指示规
美国GSG校正环规│进口对表环规
美国PMC石油螺纹规│Van Keuren
Barcor Inc.倒角规│小孔量仪
德国IBR测量模块│C200电子柱
美国WESTport螺纹规│硬度计
德国JBO螺纹规│深度规、板牙
Vermont Gage螺纹规│VTG螺纹规
Rivelec印模泥│Plastiform复制胶
Lehrmess螺纹规│LMW莱尔麦斯
德国STOTZ气动量仪│电感量仪
Rex Gauge橡胶硬度计│1600-A
Marposs电子柱E4N│传感器F10
美国Bal-tec™精密测量球
Threadmaster│Tru-Thread螺纹规
Western Gage气动塞规│气动环规
Gagemaker单项仪│石油螺纹检测
Thread Check螺纹规│螺纹测针
美国Dyer Gage卡规│缸径规
Sun-Tec便携式硬度计│硬度块
Cameron密封槽球规│喀麦隆球规
苏州马尔量具│昆山Mahr粗糙度仪
Magnaflux美国磁通探伤设备耗材
Trulok 焊接量规│航空倒角规
美国SPI 通用精密量具
Hemco Gage石油量规│涂层螺纹规
测范社sokuhansha│JPG螺纹规
美国G.A.L. Gage焊缝检验尺
Wrentham梅花通止规│WTG量规
GageAssembly螺纹规│G.A.CO
丹麦Leitech进口螺纹深度规
Mueller Gage/穆勒沟槽量仪
美国环球Universal Punch量规
苏州测量仪器│昆山进口螺纹规
|
Gagemaker中径量仪
PG-6000价格
PG-6001货期
美国GAGEMKAER单项仪价格
进口石油螺纹规价格
PG-6001货期
美国GAGEMKAER单项仪价格
进口石油螺纹规价格
Gagemaker螺纹辊系列测量螺纹中径
苏州Gagemaker单项仪价格
| PG-6000 | Internal thread roll gage 1½” to 9” |
| PG-6000-1 | Internal thread roll gage 1½” to 9”, .0001" Res. Indicator |
| PG-6000-17 | Locking T-nut for arms |
| PG-6000-1w/XA | Internal functional roll gage with 4 ½” reach arms, .0001" Res. Indicator |
| PG-6000-SA | Replacement arm set 2½” reach |
| PG-6000w/XA | Internal functional roll gage with 4 ½” reach arms. |
| PG-6000-XA | Extended reach arm set 4½” reach |
| PG-6001 | Internal thread roll gage 9” to 16” |
| PG-6001-1 | Internal thread roll gage 9” to 16”, .0001" Res. Indicator |
| PG-6002 | Internal thread roll gage 16” to 24” |
| PG-6002-1 | Internal thread roll gage 16” to 24”, .0001" Res. Indicator |
| PG-6003 | Internal Thread roll gage 24” to 32” |
| PG-6003-1 | Internal Thread roll gage 24” to 32”, .0001" Res. Indicator |
| PGC-12-W2 | Precision Calibration Package: MT-4012-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container |
| PGC-24-W2 | Precision Calibration Package: MT-4024-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container |
| PGC-36-W2 | Precision Calibration Package: MT-4036-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container |
| PGC-48-W2 | Precision Calibration Package: MT-4048-10, CAL-PAK, Card Set, CRC, TF-2R, TF-XYT, computer, CERTIFI, TDWIN, AWH-100, torque wrench, and shipping container |
| PG-LTRP-12 | Lower Thread Roll Pin for the PG-6000 with washer and screw |
| PG-UTRP-7 | Upper Thread Roll Pin for the PG-6000 with washer and screw |
| PN-3000/T.04087 | Pin Seal Standoff Plate, 0.04087” (1.038 mm) thick |
| PN-3000/T.044 | Pin Seal Standoff Plate, 0.0440” (1.12 mm) thick |
| PN-3000/T.0472 | Pin Seal Standoff Plate, 0.0472” (1.20 mm) thick |
| PN-3000/T.0591 | Pin Seal Standoff Plate, 0.0591” (1.50 mm) thick |
| PN-3000/T.064 | Pin Seal Standoff Plate, 0.0640” (1.62 mm) thick |
| PN-3000/T.072 | Pin Seal Standoff Plate, 0.0720” (1.83 mm) thick |
| PN-3000/T.0748 | Pin Seal Standoff Plate, 0.0748” (1.90 mm) thick |
| PN-3000/T.078 | Pin Seal Standoff Plate, 0.0780” (1.9812 mm) thick |
| PN-3000/T.0787 | Pin Seal Standoff Plate, 0.0787” (2.00 mm) thick |
| PN-3000/T.0811 | Pin Seal Standoff Plate, 0.0811” (2.06 mm) thick |
| PN-3000/T.0815 | Pin Seal Standoff Plate, 0.0815” (2.07 mm) thick |
| PN-3000/T.094 | Pin Seal Standoff Plate, 0.0940” (2.39” mm) thick |
| PN-3000/T.100 | Pin Seal Standoff Plate, 0.1000” (2.54 mm) thick |
| PN-3000/T.114 | Pin Seal Standoff Plate, 0.1140” (2.90 mm) thick |
| PN-3000/T.1181 | Pin Seal Standoff Plate, 0.1181” (3.00 mm) thick |
| PN-3000/T.121 | Pin Seal Standoff Plate, 0.1210” (3.07 mm) thick |
| PN-3000/T.122 | Pin Seal Standoff Plate, 0.1220” (3.10 mm) thick |
| PN-3000/T.1221 | Pin Seal Standoff Plate, 0.1221” (3.10 mm) thick |
| PN-3000/T.1378 | Pin Seal Standoff Plate, 0.1378” (3.50 mm) thick |
| PN-3000/T.171 | Pin Seal Standoff Plate, 0.1710” (4.34 mm) thick |
| PN-3000/T.1969 | Pin Seal Standoff Plate, 0.1969” (5.00 mm) thick |
| PN-3000/T.200 | Pin Seal Standoff Plate, 0.2000” (5.08 mm) thick |
| PN-3000/T.3149 | Pin Seal Standoff Plate, 0.3149” (8.00 mm) thick |
| PN-3000/T.350 | Pin Seal Standoff Plate, 0.3500” (8.89 mm) thick |
| PN-3001 | Pin Nose Diameter Gage, (0” - 5.50”), customer to supply standoff and contact point diameter information prior to production of gage |
| PN-3002 | Pin Nose Diameter Gage, (0” - 9.50”), customer to supply standoff and contact point diameter information prior to production of gage |
| PN-3003 | Pin Nose Diameter Gage, (0” - 13.50”), customer to supply standoff and contact point diameter information prior to production of gage |
| PN-3004 | Pin Nose Diameter Gage, up to 19.50", customer to supply standoff and contact point diameter information prior to production of gage |
| PN-3005 | Pin Nose Diameter Gage, up to 24", customer to supply standoff and contact point information prior to production of gage |
| PN-3005 | Pin Nose Diameter Gage, up to 24", customer to supply standoff and contact point information prior to production of gage |
| PN-3006 | Pin Nose Diameter Gage, 24"-36", customer to supply standoff and contact point information prior to production of gage |
| PN-31VM-30 | 30° Internal/External Apex Seal Diameter “V”, Int. 2⅜” - 6⅝”/ Ext. 4” - 6⅝” |
| PN-33VM-30 | 30° Internal/External Apex Seal Diameter “V”, Int. 2⅜” - 14”/ Ext. 4” - 14” Ext |
| PN-33VM-30-2 | Upper Anvil |
| PN-33VM-30-3 | Lower Anvil |
| PNA-3001 | 30° External Apex Diameter Gage, Anvils 2” - 4¼” |
| PNA-3001-VMA | 30° External Apex Diameter Gage, Anvils 2” - 4¼” |
| PNA-3002 | 30° External Apex Diameter Gage, Anvils 2” - 9⅝” |
| RG-7000 | External thread roll gage ⅝” to 4” |
| RG-7000, PG-6000 | Thread Roll Gage calibration |
| RG-7000-1 | External thread roll gage ⅝” to 4”, .0001" Res. Indicator |
| RG-7001 | External thread roll gage 4” to 8” |
| RG-7001-1 | External thread roll gage 4” to 8”, .0001" Res. Indicator |
| RG-7002 | External thread roll gage 8” to 12” |
| RG-7002-1 | External thread roll gage 8” to 12”, .0001" Res. Indicator |
| RG-7003 | External thread roll gage 12” to 16” |
| RG-7003-1 | External thread roll gage 12” to 16”, .0001" Res. Indicator |
| RG-7004 | External thread roll gage 16” to 20” |
| RG-7004-1 | External thread roll gage 16” to 20”, .0001" Res. Indicator |
| RG-7005 | External thread roll gage 20” to 24” |
| RG-7005-1 | External thread roll gage 20” to 24”, .0001" Res. Indicator |
| RG-7006 | External thread roll gage 24" to 28” |
| RG-7006-1 | External thread roll gage 24" to 28”, .0001" Res. Indicator |
| RG-LAA | Lower Adjustment Arm for RG-7000 |
| RP-250-344 | R-RX Groove Profile R 20 |
| RP-310-469 | R-RX Groove Profile R23 to R45, R49, R53, R57, R65, R69, R82, R84, & R99 |
| RP-380-531 | R-RX Groove Profile R46, R73, R85, |
| RP-440-656 | R-RX Groove Profile R50, R54, R66, R86, R87 |
| RP-500-781 | R-RX Groove Profile R47, R70, R74, R88 |
| RP-560-906 | R-RX Groove Profile R90 |
| RP-620-1063 | R-RX Groove Profile R63 |
| RP-690-1313 | R-RX Groove Profile R91 |
| RS-1.0-REG-B | Rod Standard for Rotary Shoulder Connection, Box, 1.0 Regular |
| RS-1.0-REG-P | Rod Standard for Rotary Shoulder Connection, Pin, 1.0 Regular |
| RS-1.5-REG-B | Rod Standard for Rotary Shoulder Connection, Box, 1.5 Regular |
| RS-1.5-REG-P | Rod Standard for Rotary Shoulder Connection, Pin, 1.5 Regular |
| RS-2.375-EF-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 External Flush |
| RS-2.375-EF-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 External Flush |
| RS-2.375-IF-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Internal Flush |
| RS-2.375-IF-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Internal Flush |
| RS-2.375-OH-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Open Hole |
| RS-2.375-OH-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Open Hole |
| RS-2.375-PAC-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 PAC |
| RS-2.375-PAC-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 PAC |
| RS-2.375-REG-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Regular |
| RS-2.375-REG-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Regular |
| RS-2.375-SH-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Slim Hole |
| RS-2.375-SH-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Slim Hole |
| RS-2.375-SLH9-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Slimline H-90 |
| RS-2.375-SLH9-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Slimline H-90 |
| RS-2.375-WO-B | Rod Standard for Rotary Shoulder Connection, Box, 2.375 Wide Open |
| RS-2.375-WO-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.375 Wide Open |
| RS-2.875-EF-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 External Flush |
| RS-2.875-EF-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 External Flush |
| RS-2.875-FH-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 Full Hole |
| RS-2.875-FH-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Full Hole |
| RS-2.875-IF-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 Internal Flush |
| RS-2.875-IF-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Internal Flush |
| RS-2.875-OH-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 Open Hole |
| RS-2.875-OH-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Open Hole |
| RS-2.875-PAC-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 PAC |
| RS-2.875-PAC-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 PAC |
| RS-2.875-REG-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 Regular |
| RS-2.875-REG-P | Rod Standard for Rotary Shoulder Connection, Pin, 2.875 Regular |
| RS-2.875-SH-B | Rod Standard for Rotary Shoulder Connection, Box, 2.875 Slim Hole |
